anual Top Discharge

Manual Top Discharge

One of the simplest types of centrifuge widely used in the industry. The solid material is scooped out manually from the top of the centrifuge

  • Overview
  • Safety Features
  • Technical Data
  • Note

Surface Finish

Mirror or Matt Finish can be provided with Grit 220 & Above on Contact & Non-Contact areas.

Drive

A.C. Inverter Drive shall be provided to vary the basket speed with built-in dynamic braking.

Cleaning-In-Place (C.I.P.) Arrangement

Provided in the manual top discharge centrifuge machine to clean the internals of the centrifuge. CIP nozzles are placed at the different location to spray the wash liquid to all the surface which are not accessible from outside. During the cleaning process the centrifuge basket to be operated at a low speed to make cleaning more effective.

The 4-point Suspension

The centrifuge is mounted on inertia platform and suspended over four vibration-isolating dampers. This provide the following unique advantages:

  • No foundation required
  • Modular Designed with Complete Flexibility to relocate the centrifuge anywhere in the plants.
  • Drive system (Belt & Pulleys) totally enclosed and can be purged with Nitrogen gas (Flameproof Design).

Zero Speed Interlock

The pneumatic cylinder will automatically get engaged with the lid as soon as basket start rotating and gets disengaged only when it completely stop which will ensure that the lid can be opened only when the basket come to a complete halt.

Proximity Sensor

Shall be provided as a safety interlock for the Lid / Body. Unless the Lid / Body is closed motors cannot start and once the lid is opened motor powers cut off.

Vibration Tripper

Will trip the Centrifuge during excessive vibration.

Design Variations Available

  • Full Body Opening (Hydraulic / Pneumatic)
  • Full Lid Opening (Hydraulic / Pneumatic / Spring Loaded)
  • Half Lid Opening
  • MOC: Stainless Steel, Carbon Steel, Hastelloy etc.
  • Coating: Rubber Lined, Halar (ECTFE) Coating, Teflon (PFA) Coating etc.
Technical Specification Centrifuge Model
Details Unit SM 24 MTD SM 36 MTD SM 48 MTD SM 60 MTD
Basket Diameter mm. 610 915 1220 1524
Basket Depth mm. 300 450 450 500
Working Capacity under lip Lts. 50 160 260 450
Basket Load (Max) Kgs. 63 200 325 563
Max. Basket revolutions rpm. 1400 1100 1000 900
Centrifugal Force G. 668 619 682 691
Filtration Area m2 0.59 1.29 2.49 2.39
Motor Power kW 2.2 5.5 11 15
Overall Dimensions -
Length mm. 1450 1780 2150 2500
Width mm. 1000 1220 1600 2000
Operating Height mm. 1175 1350 1650 2100
Weight of Machine with Motor Kgs. 1150 2750 4000 5500
  • The centrifugal force relate to the basket diameter and maximum speed.
  • Basket load in Kgs. will vary based on bulk Density of the material.
  • We reserve the right to alter size, weight and design features.
  • Lower / Higher Capacity models are available on request.
  • Website Designed By : Megh Technologies