This type is an improvement on the basic Manual Top Discharge Centrifuge. The machine has a dynamically balanced rotating basket with a conical shell for easy removal of filter bag with solid material. Our compact spring assisted lifting mechanism enables opening of lid by a single person. Alternatively, Hydraulic or Pneumatic arrangement can also provided.
Our new locking system for basket top does not allow the machine to start unless all basket locks are properly engaged.
Leak Test is carried out on all Centrifuges. Machine is tested at a pressure of 40 mbar and pressure drop is restricted to below 6 mbar / hr.
Lining/ Coating can be provided not only on the contact parts but also on the exterior body for prevention from spillage and corrosive atmosphere.
*The load indicated is based on mechanical design. However output per batch depends on various other factors and may be lower than permissible load.
We supply machines upto basket diameter of 2100 mm.
In a Standard Lifting Bag type of Centrifuge a chain pulley block or hoist is required to lift the bag out of the centrifuge. These lifting devices normally collect dust and dirt, increasing the chances of the product being contaminated during removal of solid cake.
Keeping this constraint in mind for a clean room application (in cGMP areas ), a special lifting device in cGMP construction has been designed for lifting the basket top along with Solids after filtration. This system eliminates usage of any chain pulley block, hence preventing any chances of contamination, which would otherwise have taken place.
Please fill up our Enquiry Form for your requirement.
Copyright Mega Machinery 2024.
All Rights Reserved.
Website Designed By : 
